Timer Module / Controller
- Working voltage: 5-30V
- The time can be adjusted by the potentiometer: the default is 0-24 seconds
- Has relay pull-in indicator light
- The module can be controlled: 10A 250VAC (AC), 10A 30VDC (DC) load
- Has relay freewheel protection
- The signal end of the module is designed with a pull-up and filter circuit, which has strong anti-interference ability
- Weight: 16g
- The timing and output relays configuration are set by user.
- 2 timer mode, i.e. Count Up Mode or Count down Mode.
- Both mode (Count Up Mode or Count down Mode) works separately and standalone.
- Both mode (Count Up Mode or Count down Mode) can be set up to 99 data.
- Direct connect to DC power source (Ф5.5 power seat provided).
- The recorded data can be edit or clear.
- 2 Playing modes: Single or Loop
- 2 Output relays that can be used to connect external device.
- Able to interface with Active LOW type sensor.
- Input voltage: DC 8V to 24V
- Size: 95mm*80mm.
- I2C interface : Fast (400kHz) I2C Interface
- EEPROM: AT24C32 32Kbit Serial I2C
- Digital Temp Sensor Output: 10 bit, ±3°C Accuracy and 0.25C resolution
- Time Format: HH:MM:SS (12/24 hr)
- Date Format: YY-MM-DD-dd
- Accuracy ±2ppm from 0°C to +40°C
- Accuracy ±3.5ppm from -40°C to +85°C
- 1Hz output pin SQW
- 32KHz output pin 32K
- Voltage Supply Battery: 2.2V - 5.5V (for RTC)
- Operating Voltage: (VCC): 2.7V - 5.5V (including 24C32)
- Operating Temperature Ranges: Commercial (0°C to +70°C) and Industrial (-40°C to +85°C)
- Battery Holder: 2032 Coin Battery
- Weight:8g (including Battery)
- Voltage: 5VDC
- Automatic Power in order to fail detect and switch circuitry
- Programmable Square-Wave output signal
- 56 Byte
- Non-volatile (NV) RAM for data storage
- Consumes less than 500nA in Battery-Backup Mode with oscillator running
- Tempreature range: -55°C - +125°C
- Working voltage:Micro USB 5.0V power-up and 6 - 30V supported
- High level trigger signal (3.0V—24V)
- Output ability: Capable of controlling the direct current that within 30v 5A or alternating current within 220v5A.
- Quiescent current: Working current is 20mA; 50mA.
- Working temperature: -40—85℃
- Timing range: 0.1 second (minimum) ~ 999 minutes (maximum) continuously adjustable