MCO3.0: No worry, we are still operating and ship order as usual. Stay safe.
Main Board
Main Board
Sort by
Show result

Features:

  • Broadcom BCM2837B0, 64-bit ARM Cortex-A53 Quad Core Processor SoC running @ 1.2GHz 1.4GHz, with metal body for better heat dissipation.
  • 1GB LPDDR2 SDRAM
  • 4 x USB2.0 Ports with up to 1.2A output
  • Expanded 40-pin GPIO Header
  • Video/Audio Out via 4-pole 3.5mm connector, HDMI, CSI camera, or Raw LCD (DSI)
  • Storage: microSD
  • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
  • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirement, 5V/2.5A via microB USB connector.
  • Supports Raspbian, Windows 10 IoT Core, OpenELEC, OSMC, Pidora, Arch Linux, RISC OS and More!
  • Dimensions: 85mm x 56mm x 17mm
RM183.96
RM190.96

Features:

  • Broadcom BCM2711, 64-bit ARM Cortex-A73 (ARMv8), Quad-core, 28nm Processor SoC running @ 1.5GHz, with a metal body for better heat dissipation.
  • LPDDR4 4GB SDRAM
  • 2*USB3.0 Port + 2*USB2.0 Port
  • Expanded 40-pin GPIO Header
  • Video/Audio Out:
    • 4-pole 3.5mm connector
    • 2 x micro HDMI port, support 4Kp60 video, dual display
    • Raw LCD (DSI)
  • Image/Camera input: CSI port
  • Storage: MicroSD
  • True Gigabit Ethernet, >900 Mbps
  • Power-over-Ethernet (PoE) support
  • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE (Bluetooth Low Energy)
  • Low-Level Peripherals:
    • 27 x GPIO
    • UART
    • I2C bus
    • SPI bus with two chip selects
    • +3.3V
    • +5V
    • Ground
  • Power Requirement, 5V/3.0A via USB type C connector.
  • Supports Raspbian, and check 3rd party Operating System.
  • Dimensions: 85mm x 56mm x 17mm
RM268.90

Features:

  • 1st Microcontroller Development Board from Raspberry Pi Foundation
  • 1st Silicon (IC), RP2040 MCU designed from the ground up by engineers of Raspberry Pi Foundation
  • Dual-Core32-bit ARM Cortex M0+ Processor
  • Flexible clock, configurable max to 133MHz
  • Ready with USB Micro B receptor for Power and Data
  • Support USB 1.1 Host and Device
  • Connected to the USB port and it will appear as USB Mass Storage by default, no driver is needed
  • Supports CircuitPython, MicroPython, C and C++Arduino IDE Programming Language
  • Drag and Drop Program loading method, just like moving file in Windows Explorer
  • Comes in 40-pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins, breadboard-friendly
  • With the edge castellations PCB, it is ready to be mounted on another PCB without an additional header pin, SMD friendly
  • Two options:
    • Comes with PRE-SOLDERED with header pins, breadboard-friendly
    • Comes with a pair of 20-way male headers (Cytron version), requires manual soldering if needed
  • Peripheral rich:
    • Extended out 26 multifunction 3.3V General Purpose I/O (GPIO)
    • 23 GPIO are digital-only
    • 3 x 12-bit ADC capable of 500Ksps, Analog to Digital Converter
    • 2 x UART (Universal Asynchronous Receiver/Transmitter)
    • 2 x SPI (Serial Peripheral Interface)
    • 2 x I2C (Inter IC)
    • 16 x PWM (Pulse Width Modulation)
    • 1 x Timer with 4 alarms
    • 1 x Real Time Counter
    • 2 x Programmable IO (PIO) that can emulate high-speed interfaces such as SD card or VGA
    • Built-in 12-bit ADC temperature sensor
  • 3-pin ARM Serial Wire Debug (SWD) port
  • Onboard Programmable LED, GP25
  • Simple yet highly flexible power supply architecture
    • Support USB power, external supply (2 - 5VDC), or even battery power.
  • Comprehensive SDK, software examples, and documentation
  • Officially from Raspberry Pi Foundation
  • Compatible with any computer with USB port, Windows, macOS, Linux
  • Work seamlessly with Raspberry Pi 4 Model B, or Raspberry Pi 400 and Raspberry Pi OS
  • Dimensions: 51mm x 21mm x 1mm
RM21.50

Features:

  • Processor: BCM 2835 SOC
  • Clock speed: 1GHz
  • RAM: 512MB
  • Built-in Wireless: BCM43143, WiFi + Bluetooth 4.1 + BLE (Bluetooth Low Energy), same as Raspberry Pi 3.
  • Memory: micro-SD
  • Display and Audio: mini-HDMI
  • USB Port: 1 x micro-B USB for data (with power too)
  • Power input: 1 x Micro-B USB for power (no data)
  • Camera interface: CSI camera connector (needs adaptor cable, 0.5mm pitch to pitch CSI)
  • GPIO: Pre-soldered 40-pin GPIO connector, compatible with Raspberry Pi Zero v1.3 and Raspberry Pi 3.
  • Compatibility of GPIO: Compatible with existing HAT addons
  • Dimensions: 65mm x 30mm x 5mm
RM74.40