Order placed from 20 Sept onwards will be ship out on 30 Sept 2021. Sorry for inconvenient caused.
Raspberry Pi
Raspberry Pi
Sort by
Show result

Features:

  • Bi-directional control for two brushed DC motor.    
  • Support motor voltage ranges from 6VDC to 24VDC.  
  • On board test button for manual control of motor.
  • Every channel output built with LED indicator. 
  • Maximum current up to 10A continuous (without heatsink at 25) and 30A peak (10 second).
  • Current limiting at 30A.   
  • Raspberry Pi compatible connector.    
  • Solid state components provide faster response time.   
  • Fully NMOS H-Bridge for better efficiency and no heat sink is required.   
  • Regenerative Braking.
  • Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency from Raspberry Pi).
  • Support sign-magnitude PWM operation.   
  • Support TTL PWM from microcontroller, NOT PWM from RC receiver.
  • Dimension:67.5mm x 59mm
RM93.50

Features:

  • 16GB MicroSD with SD card adapter (Raspberry Pi Logo)
  • SD Speed Class: Class 10
  • UHS Speed Grade: UHS 1
  • Application Performance: A1
    •  Sequential Read >12MB/S (A1 Standard 10MB/S)
    •  Random IOPS - Read: 2000 IOPS (A1 standard 1500)
    •  Random IOPS - Write: 500 IOPS (A1 standard 500)
  • Recommended and comes from Raspberry Pi Foundation
  • Pre-loaded with latest NOOBS
  • NOOBs version: 3.3.1 (Release date: 14 February 2020), compatible for all Raspberry Pi boards including Raspberry Pi 4 Model B
RM46.00

Specifications:

  • Operating Voltage: 5v
  • Color: Black
  • Current: 0.20A
  • Dimension: 3 x 3 x 0.7 cm
RM7.50
RM9.00

Features:

  • Resolution: 800 x 480 px
  • Touch Screen Type: Resistive screen
  • Touch Screen interface is through SPI pins from the 40-pin GPIO.
  • Compatible with:
    •  Raspberry Pi3 Model B
    •  Raspberry Pi3 Model B+
  • With backlight control switch (slide switch at the back of LCD)
  • Working Voltage/Current: DC 5V / 1A
  • Power source: Default from Raspberry Pi GPIO, alternatively USB Micro B on the back of display. next to the HDMI socket.
  • It's suitable for Raspberry Pi series (not Raspberry Pi Zero due to mini HDMI on zero)
  • You can download the official firmware and drivers to use it.
  • And you can use integrated firmware to use it (the firmware with driver, is very easy).
  • Touch screen interface: SPI with Raspberry Pi via the 40-pin GPIO.
  • Dimension: 120mm x 74mm x 7mm
RM164.00

Features:

  • Compatible all models of Raspberry Pi 1, 2 and 3; not to forget zero series too (just change the FFC cable)
  • 5MP(megapixel) omnivision 5647 camera module
  • Still picture resolution of 2592 x 1944
  • Video supports 1080p at 30fps, 720p at 60fps and 640x480p 60/90 recording
  • 15 pin MIPI camera serial interface plugs directly into the Raspberry Pi Board
  • Size is 20mm x 25mm x 9mm
  • Weight of 3g
RM51.95
RM56.60

Specifications:

  • Model: HN-5258
  • Input: AC 100-240V 50/60Hz
  • Output: 5V/2.5A
  • DC plug: Micro B USB
  • Cable Length: 100cm
  • Plug Specifications: UK Plug
RM16.80

Features:

  • Easy to use
  • Compatibility
  • Multi-function
  • Configurable
  • Suitable for Learning
RM988.90

Features:

  • Input: 100-240V ~ 50/60Hz 0.6A
  • Output: Regulated +5VDC 2A
  • Wire length: 85 / 18cm
RM21.90

Specifications:

  • Input voltage: AC (AC) 100V-240V 50-60Hz
  • Output voltage: DC (DC) 5V
  • Rated output current: 3A
  • Modulation method: pulse width modulation
  • Work efficiency: 90%
  • Temperature coefficient: ±0.02% °C
  • Start time <1S (AC 220V input Io=10%)
  • Output ripple & noise: 100mVp-p
  • Output voltage accuracy: 95%
  • Voltage regulation rate: 5%
  • Load adjustment rate: 4%
  • Product solution: Transistor solution or IC* solution
  • Protection function: Overload protection 105%~150% rated power
  • Automatic recovery overvoltage protection 115% ~ 135% of the voltage nominal plant
  • Dielectric strength: Input - output AC 2000V / 10 seconds
  • Insulation resistance: input - output > 50MΩ, DC 500V
  • Environment: Operating temperature 0~45°C, 20%~90%RH
  • Storage temperature -20 ° C ~ 85 ° C 10% ~ 95% RH
  • Output DC interface: Type-C USB
RM19.80

Features:

  • A great kit for Raspberry Pi beginner to get started
  • With Grove modules, no wiring is necessary
  • Plug and Use module
  • Include 10 Grove modules and a Grove base for Raspberry Pi
  • Now the kit comes with the Grove Base Hat for Raspberry Pi, making Raspberry Pi compatible with the Grove System.
  • The Grove Base Hat for Raspberry Pi provides Digital/Analog/I2C/PWM/UART port to meet all your needs. With the help of build-in MCU, a 12-bit 8 channel ADC is also available for Raspberry Pi.
RM141.90

Specifications:

  • Model: HN-5258
  • Input: AC 100-240V 50/60Hz
  • Output: 5V/2.5A
RM17.90

Specification:

  • Model: 0530
  • Input: AC 100-240V 50/60Hz
  • Output: 5V/3A
  • DC plug: Micro USB
  • Cable Length: 115cm
  • Plug Specifications: UK Plug
  • Push ON Push OFF button on the cable
RM18.50

Details:

  • Measurement: 146.8mm x 97.5mm x19mm
  • weight:110g
  • Operation voltage: 3v, AAA*2
  • Operation current:<50 mA
  • Sleep current:<1 mA
RM35.00

Features:

  • Extend 40-pin GPIO of Raspberry Pi out to Breadboard friendly PCB and header pin
  • Fully Assembled, plug and use
  • GPIO is nicely labeled
  • 40-way IDE/IDC rainbow cable, polarized, ~30cm length
RM15.00

Features:

 

  • Customized for Raspberry Pi 2B, Pi B+ and Raspberry Pi 3 Model B
  • Access the board more easily : Power , Audio , USB , LAN , USB, SD card , HDMI .ect interfaces.Cooling design with fan : great heat dissipation performance , help to extend using life of Raspberry Pi.
  • Notice: this product is a DIY case , and needs you to assemble it , more joyful for your Raspberry Pi .
  • Material: ABS
  • Not included Dc Fan and Raspberry PI
RM11.98
RM16.98