RM57.00
Arduino SIM800L GPRS GSM Module
Price RM57.00
Product SKU GSM-GPRS- SIM800L
Size (L x W x H) 3 cm x 3 cm x 1 cm
Points Needed 2090
Availability 2
Quantity
Description

Description:
SIM800L is a miniature cellular module which allows for GPRS transmission, sending and receiving SMS and making and receiving voice calls. Low cost and small footprint and quad band frequency support make this module perfect solution for any project that require long range connectivity. After connecting power module boots up, searches for cellular network and login automatically. On board LED displays connection state (no network coverage - fast blinking, logged in - slow blinking).
NOTICE: Be prepared to handle huge power consumption with peek up to 2A. Maximum voltage on UART in this module is 2.8V. Higher voltage will kill the module.
Two antennas!
This module have two antennas included. First is made of wire (which solders directly to NET pin on PCB) - very useful in narrow places. Second - PCB antenna - with double sided tape and attached pigtail cable with IPX connector. This one have better performance and allows to put your module inside a metal case - as long the antenna is outside.

Specification:

Supply voltage: 3.4V - 4.4V
Recommended supply voltage: 4V
Power consumption:

sleep mode < 2.0mA




idle mode < 7.0mA




GSM transmission (avg): 350 mA




GSM transmission (peek): 2000mA

Module size: 25 x 23 mm
Interface: UART (max. 2.8V) and AT commands(3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
SIM card socket: microSIM (bottom side)
Supported frequencies: Quad Band (850 / 950 / 1800 /1900 MHz)
Antenna connector: IPX
Status signaling: LED
Working temperature range: -40 do + 85 ° C
GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
GPRS mobile station class B
Supports Real Time Clock
Supports A-GPS


Attachments:
Manual User