Description
Highlight
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
Module Interface:
- DC+: positive power supply (VCC)
- DC-: negative power supply (GND)
- IN,IN2,IN3,IN4: can be high or low level control relay, S,S2,S3,S4, HIGHT OR LOW LEVER
Relay Outputs:
- NO,2,3,4: normally open relay interface
- COM,2,3,4: Common Interface Relays
- NC,2,3,4: normally closed relay interface
High and Low Level Trigger Options:
- It is low level trigger when jumper connect to LOW pin
- It is high level trigger when jumper connect to HIGH pin
Packing List:
- 1 x 4 Channel Active H/L 24V Optocoupler Relay Module
What's in the box
- 1 x 4 Channel Active H/L 24V Optocoupler Relay Module