Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 43mm x 17mm x 17mm
Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 43mm x 17mm x 17mm
RM6.00
5.00
17%
Stock available
|
Feature:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 50mm x 38mm x 17mm
Feature:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 50mm x 38mm x 17mm
RM15.00
7.40
51%
Stock available
|
Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 76mm x 56mm x 17mm
Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 76mm x 56mm x 17mm
RM21.70
14.40
34%
Stock available
|
Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 137mm x 55mm x 17mm
Specification:
- Digital output controllable
- Compatible with any 5V microcontroller such as Arduino.
- Rated through-current: 10A (NO) 5A (NC)
- Control signal: TTL level
- Max. switching voltage 250VAC/30VDC
- Max. switching current 10A
- Size: 137mm x 55mm x 17mm
RM32.55
24.55
25%
Stock available
|
Feature:
- 5V 16-Channel Relay interface board, and each one needs 50-60mA Driver Current.
- Equiped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status.
Feature:
- 5V 16-Channel Relay interface board, and each one needs 50-60mA Driver Current.
- Equiped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status.
RM47.17
43.17
8%
Stock available
|
Feature:
- 12V 16-Channel Relay interface board, and each one needs 50-60mA Driver Current.
- Equiped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status.
Feature:
- 12V 16-Channel Relay interface board, and each one needs 50-60mA Driver Current.
- Equiped with high-current relay, AC250V 10A; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status.
RM47.17
43.17
8%
Out of stock
|
- Control Voltage:5V
- Static Current:0mA
- Working Current:13.8mA
- Size: 25mm x 34mm x 25mm (Length*Width*Height)
- Input voltage: 5VDC, Maximum Output Current: 2A, Maximum Output Voltage: 240VAC
- Input Voltage of Control Signal: 0-2.5V (low level state), the relay will be on; 3-5V (high level state), the relay will be off.
- Triggered at low level.
- Control Voltage:5V
- Static Current:0mA
- Working Current:13.8mA
- Size: 25mm x 34mm x 25mm (Length*Width*Height)
- Input voltage: 5VDC, Maximum Output Current: 2A, Maximum Output Voltage: 240VAC
- Input Voltage of Control Signal: 0-2.5V (low level state), the relay will be on; 3-5V (high level state), the relay will be off.
- Triggered at low level.
RM8.50
7.40
13%
Stock available
|
- Control Voltage:5V
- Static Current:0mA
- Working Current:26.8mA
- Size:55mm x 33mm x 25mm (Length*Width*Height)
- Control Voltage:5V
- Static Current:0mA
- Working Current:26.8mA
- Size:55mm x 33mm x 25mm (Length*Width*Height)
RM16.60
14.40
13%
Stock available
|
- Control Voltage:5V
- Static Current:0mA
- Working Current:48mA
- Size:57mm x 55mm x 25mm (Length*Width*Height)
- Control Voltage:5V
- Static Current:0mA
- Working Current:48mA
- Size:57mm x 55mm x 25mm (Length*Width*Height)
RM31.50
27.40
13%
Stock available
|
- Control Voltage:5V
- Static Current:0mA
- Working Current:48mA
- Size:106mm x 56mm x 25mm (Length*Width*Height)
- Control Voltage:5V
- Static Current:0mA
- Working Current:48mA
- Size:106mm x 56mm x 25mm (Length*Width*Height)
RM60.30
52.40
13%
Stock available
|
Specifications:
- 5V 1 channel relay module
- Configureable Activation Logic, High or Low, via mini jumper
- Maximum Current Rating: 10A
- Maximum Voltage Rating: AC 250V
- Can control various appliances with large current and high voltage
- Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
- Build in an Opto-Isolator for extra isolation and protection to controller.
- A power indicator LED, Green
- Comes with an indicator LED
Specifications:
- 5V 1 channel relay module
- Configureable Activation Logic, High or Low, via mini jumper
- Maximum Current Rating: 10A
- Maximum Voltage Rating: AC 250V
- Can control various appliances with large current and high voltage
- Can be controlled directly by microcontroller such as Arduino, 8051, AVR, PIC, DSP and ARM
- Build in an Opto-Isolator for extra isolation and protection to controller.
- A power indicator LED, Green
- Comes with an indicator LED
RM7.00
5.80
17%
Stock available
|
Features:
- Maximum load: AC 250V/10A, DC30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- Module voltage 5V
- Each channel module can be set high or low triggered by jumper
- Fault-tolerant design, even if the control line is broken, the relay will not operate
- Power indicator (green), 4 relay state indicator (red
- Interface design user-friendly, all interfaces are available through the wiring terminal direct connection leads, very convenient
- Module size: 50mm X 41mm X 18mm (L * W * H)
- Has 4 mounting bolts holes, hole 3.1mm, spacing 67mm * 44.5mm
Features:
- Maximum load: AC 250V/10A, DC30V/10A
- SMD optocoupler isolation, strong driving ability, stable performance; trigger current 5mA
- Module voltage 5V
- Each channel module can be set high or low triggered by jumper
- Fault-tolerant design, even if the control line is broken, the relay will not operate
- Power indicator (green), 4 relay state indicator (red
- Interface design user-friendly, all interfaces are available through the wiring terminal direct connection leads, very convenient
- Module size: 50mm X 41mm X 18mm (L * W * H)
- Has 4 mounting bolts holes, hole 3.1mm, spacing 67mm * 44.5mm
RM10.50
8.50
19%
Stock available
|
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
RM18.50
15.50
16%
Stock available
|
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
RM18.50
15.50
16%
Out of stock
|
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
Features:
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Module can be set high level or low level trigger by jumper wire;
- Power indicator light (green), relay status indicator light (red);
- Module size: 75mm X 53mm X 20mm.
- With 4 fixing bolt holes, hole 3.1mm
RM18.50
15.50
16%
Out of stock
|
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
RM27.00
24.00
11%
Stock available
|
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
- Maximum load on normally open pin: AC 250V/10A, DC 30V/10A.
- Trigger current 5mA;
RM30.00
25.00
17%
Stock available
|
Specifications:
- Working voltage: DC 12V
- Standby current: 12ma
- working current: 50ma
- Load: AC 250V 10A(max) or DC 30V 10A(max)
Specifications:
- Working voltage: DC 12V
- Standby current: 12ma
- working current: 50ma
- Load: AC 250V 10A(max) or DC 30V 10A(max)
RM35.00
30.00
14%
Stock available
|
- Time can be adjusted via a potentiometer, meeting your most occasions
- MicroUSB 5.0V power supply with input, easy to use 5--30V wide supply voltage
- External triggering and onboard buttons
- Two triggering methods With a relay pull-in indicator Interference ability, under various interference will not malfunction relay for industrial control.
- Time can be adjusted via a potentiometer, meeting your most occasions
- MicroUSB 5.0V power supply with input, easy to use 5--30V wide supply voltage
- External triggering and onboard buttons
- Two triggering methods With a relay pull-in indicator Interference ability, under various interference will not malfunction relay for industrial control.
RM7.80
5.50
29%
Stock available
|
|
|
