MCO3.0: No worry, we are still operating and ship order as usual. Stay safe.
Arduino Compatible Main Board
Arduino Compatible Main Board
Sort by
Show result

Specification:

  • Dimension: 69mm x 52mm x 10mm
  • This version is optimized the use of Arduino compare to older version.
  • increase the pin socket, to facilitate the use of pin like 5V and GND.
  • 100% Arduino Compatible
  • Digital I / O digital input / output of 0 to 13 .
  • Analog I / O Analog Input / output of 0 to 5 .
  • PWM Pin - 3,5,6,9,10,11
  • Support ISP download function.
  • Input voltage : no external power supply when connected to the computer USB, external power supply 5V ~ 9V DC voltage input .
  • Output voltage : 5V DC voltage output and 3.3V DC voltage output .
  • Using Atmel Atmega328P microprocessor controller
  • This does not comes with cable. Cable is sell separately.
RM22.90

Specification:

  • Microcontroller: ATmega2560
  • Operating Voltage: 5VDC
  • Input Voltage (recommended): 7-12V through DC jack
  • Input Voltage (limits): 6-20V through DC jack
  • Digital I/O Pins: 54 (of which 14 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by the bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
  • CH340 as USB to UART IC
  • USB B type socket for USB power and interface
RM55.00

Specification:

  • Arduino Nano compatible
  • Microcontroller: ATmega328P
  • Operating Voltage (logic level): 5 VDC
  • Input Voltage (recommended): 7-12 V, via Vin
  • Input Voltage (limits): 6-20 V, via Vin
  • Digital I/O Pins: 14 (of which 6 provide PWM output), same as Arduino UNO
  • Analog Input Pins: 8
  • DC Current per I/O Pin: 40 mA
  • Flash Memory: 32 KB (ATmega328P) of which 2 KB used by bootloader
  • SRAM: 2 KB (ATmega328P)
  • EEPROM: 1 KB (ATmega328P)
  • Clock Speed: 16 MHz
  • USB mini B socket for power and data
  • Uses CH340 instead of FT232 (Original Nano)
  • Dimension: 45mm x 18mm x 10mm
RM26.00

Specification:

  • Microcontroller: Atmel Atmega328
  • Operating Voltage (logic level): 5V
  • Input Voltage (recommended): 7V-12V
  • Input Volatge (limits): 6V-20V
  • Digital I/O pin: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 8
  • DC Current per I/O Pin: 40mA
  • Flash Memory: 32KB of which 2KB used by bootloader
  • SRAM: 2KB
  • EEPROM: 1KB
  • Clock Speed: 16MHz
  • Dimension: 0.73" x 1.70"
  • Lenght: 45mm
  • Width: 18mm
  • Weight: 5g
RM24.00

Specification:

  • 14 digital input/output ports RX, TX, D2~D13,
  • 8 analog input ports A0~A7
  • 1 pair of TTL level serial port transceiver port RX/TX
  • 6 PWM ports, D3, D5, D6, D9, D10, D11
  • Using Atmel Atmega328P-AU microcontroller
  • Support serial port download
  • upport external 3.3V~12V DC power supply
  • Support 9V battery power supply
  • Clock frequency 16MHz
  • Size: 33.3*18.0 (mm)
RM12.90

Features:

  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Reverse polarity protected
  • DC input 5V up to 12V
  • On board Power and Status LEDs
  • Dimensions: Less than 2 grams, 0.7x1.3" (18x33mm)
RM53.10

Specification:

  • Dimension: 69mm x 52mm x 10mm
  • This version is optimized the use of Arduino compare to older version.
  • increase the pin socket, to facilitate the use of pin like 5V and GND.
  • 100% Arduino Compatible
  • Digital I / O digital input / output of 0 to 13 .
  • Analog I / O Analog Input / output of 0 to 5 .
  • PWM Pin - 3,5,6,9,10,11
  • Support ISP download function.
  • Input voltage : no external power supply when connected to the computer USB, external power supply 5V ~ 9V DC voltage input .
  • Output voltage : 5V DC voltage output and 3.3V DC voltage output .
  • Using Atmel Atmega328P microprocessor controller
  • This does not comes with cable. Cable is sell separately.
RM42.00

Specifications:

  • Microcontroller: ESP-8266EX
  • Operating Voltage: 3.3V
  • Digital I/O Pins: 11
  • Analog Input Pins: 1
  • Clock Speed: 80MHz/160MHz
  • Flash: 4M bytes
  • Dimension: 70mmx60mmx10mm
RM25.90
  • Power Sources
    • Any +3.3V pin (+3.3V)
    • Any +5V pin (+5V)
    • USB connector (+5V)
RM19.50