Price | RM6.50 |
Product SKU | SM-A4988-DR |
Brand | No Brand |
Size (L x W x H) | 2 cm x 1.5 cm x 1.5 cm |
Points Needed | 1000 |
Availability | 14 |
Quantity |
|
Description
Highlight
Specifications:
- Simple step and direction control interface
- Five different step resolutions : full-step, half step, quater-step, eight-step and sixteenth-step
Description:
This Stepper Motor Driver A4988 comes with heatsink. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.
Specifications:
- Simple step and direction control interface
- Five different step resolutions : full-step, half step, quater-step, eight-step and sixteenth-step
- Adjustable current control lets you set the maximum current output with a potentiometer which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- Over-temperature thermal shutdown, under-voltage lockout and crossover-current protection
- Short-to-ground and shorted-load protection
- Dimension: 20mm x 15mm x 10mm
Packing list:
- 1x A4988 Stepper Motor Driver
- 1x Heatsink
Document:
Dimension:
What's in the box
Packing list:
- 1x A4988 Stepper Motor Driver
- 1x Heatsink